Mounted Units & Inserts

Contact Now

Mounted bearings, sometimes called bearing units or bearing blocks, have a bearing installed in a housing to ease installation and provide additional support for the bearing. They are face or surface mounted in applications where the shaft is perpendicular to the unit. Bearing inserts are used to replace worn or damaged bearings in an existing bearing housing. Collar bearings support high axial loads and limit radial movement. Flanges help ensure that the bearing is flush and provides added rigidity. Pillow-block (Plummer block) bearings attach to a vertical or horizontal surface to support rotating shafts and with light to moderate loads, such as in conveying and other operations where the shaft passes through the bearing. Take up bearings are used to align track and tension conveyor belts.

AMI 209CCO Mounted Units & Inserts

6700 N 10000 rpm
1.00 mm 18000 rpm

AMI 208CCO Mounted Units & Inserts

95.000 mm 81500 N
170.0000 mm 2400 rpm

AMI 207CCO Mounted Units & Inserts

480 mm 5960 kN
400 mm 433.490 kN

AMI 206CCO Mounted Units & Inserts

47.625 mm 2400 r/min
207 kN 23038 CCK/W33

AMI MUCFCF205-14NP Mounted Units & Inserts

75 mm W 15
98.552 mm AN 15

AMI 205CCO Mounted Units & Inserts

3800 rpm 2800 rpm
70.000 mm No Shield, no Seal,

AMI UETBL206-18CEW Mounted Units & Inserts

19 mm 12.1 kN
2.28 kN 24000 r/min

AMI UETBL205CEW Mounted Units & Inserts

32 mm 28 mm
33 mm 251 kN

AMI UETBL205-16CEW Mounted Units & Inserts

180 mm 87 mm
131.762 mm 24 mm

AURORA KG-7Z Mounted Units & Inserts

1.00 mm 9000 rpm
4000 N 25.000 mm

AMI UETBL205-15CEW Mounted Units & Inserts

400 mm Tr 400x5
328 mm MS 3184-80

AURORA KG-7 Mounted Units & Inserts

0.8 11000 r/min
21.6 kN 0.54 kN
1/15