Single Row Ball Bearings

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:

Excellent for high speeds,Good radial load capacity.Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds.Can operate with low noise,Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

SKF R12FFST Single Row Ball Bearings

7 mm 2.4
0.28 0.6 mm

SKF 488504 Single Row Ball Bearings

118 kN 151 kN
EPR 15 2 x 3/8-16 UNC

SKF 488503 Single Row Ball Bearings

1.9 0.35
410 mm TQON/GW

SKF 487503 Single Row Ball Bearings

36 mm 90 mm
100 mm 1 mm

SKF R12 Single Row Ball Bearings

180 mm 82 mm
13.9 mm 2.8

SKF R10ZZST Single Row Ball Bearings

40.0000 mm 0.64 mm
14300 N 15000 rpm

SKF 415S Single Row Ball Bearings

1600 r/min 9.3 mm
885 mm 0.02

SKF 417MFF Single Row Ball Bearings

90 mm 54 mm
1 mm 0.56 kg

SKF 488502 Single Row Ball Bearings

16.00 mm 29100 N
2400 rpm 150.0000 mm

SKF 418MF Single Row Ball Bearings

40000 rpm 0.30 mm
5.0 mm 956 N

SKF 418M Single Row Ball Bearings

5 mm 22000 kN
612 mm 475 kg

SKF 415MFF Single Row Ball Bearings

1/4 NPT 133 kN
SNW 34x5.7/8 360.363 mm
1/15